Safety Cabinet for Toxic and Reactive Substances, 1 Glass Door

COMPLIANCE

- Compliant with Articles R.5132-66 and R.5132-68 of the Public Health Code.
- Complies with the recommendations of the French
National Institute for Health and Safety (I.N.R.S..). - Standardized pictograms comply with ISO 3864 and NF X08.003 standards, as well as European Directive 92/58/EEC.

ADVANTAGES

- Separation by hazardous product categories in accordance with the requirements of the I.N.R.S. and the Public Health Code.
- Modular solution for storing your hazardous products.
- Compartment layout customized to your needs.
- Models that can be assembled together

PASSIVE SAFETY

- Constructed of 10/10 steel.
- White epoxy paint (RAL 9010).
- Standardized pictograms.
- Steel containment shelves, height-adjustable on racks.
- Steel containment tray, removable at the bottom of each compartment.

ACTIVE SAFETY

- Upper and lower ventilation: Air intake with grille at the bottom of the doors; 100 mm diameter roof vent for potential connection
- Lockable swing doors,

OPTIONS

- PVC equipment for corrosive compartments, including PVC containment shelves and a PVC containment tray.
- Additional shelves.
- Absorbent mats

N.B. : According to the recommendations of the French National Institute for Health and Safety (I.N.R.S.) and for safety reasons (chemical reactions between incompatible products), products of different types must be stored separately. Each cabinet is therefore intended for a single type of chemical (flammable, toxic, corrosive, etc.). Please note that these cabinets are not suitable for storing highly corrosive products (nitric, sulfuric, hydrochloric acids, etc.) or highly flammable products.