Safety Cabinet for Toxic and Reactive Substances

COMPLIANCE

- Compliant with Articles R.5132-66 and R.5132-68 of the Public Health Code.
- Complies with the recommendations of the French
National Institute for Health and Safety (I.N.R.S..). - Standardized pictograms comply with ISO 3864 and NF X08.003 standards, and with European Directive 92/58/EEC.

ADVANTAGES

- Separation by categories of hazardous products in accordance with the requirements of I.N.R.S. and the Public Health Code.
- Modular solution for storing your hazardous products.
- Compartment configuration available upon request.
- Models that can be assembled together

PASSIVE SAFETY

- Constructed of 10/10 steel.
- White epoxy paint (RAL 9010).
- Standardized pictograms.
- Steel containment shelves, height-adjustable on racks.
- Steel containment tray, removable at the bottom of each compartment.

ACTIVE SAFETY

- Upper and lower ventilation: Air intake with grille at the bottom of the doors; 100 mm diameter roof vent for potential connection
- Lockable swing doors,

OPTIONS

- PVC equipment for corrosive compartments, including PVC spill containment shelves and a PVC spill containment tray.
- Additional shelves.
- Absorbent matN.B.
: According to the recommendations of the French National Institute for Health and Safety (I.N.R.S.) and for safety reasons (chemical reactions between incompatible products), products of different types must be stored separately. Each cabinet is therefore intended for one type of chemical (flammable, toxic, corrosive, etc.). Please note that these cabinets are not suitable for storing highly corrosive products (nitric, sulfuric, and hydrochloric acids, etc.) or highly flammable products.